Product Description
General Features: Speaker Size 6-1/2", Design 2-way, Tweeter Design Dome, Tweeter Composition Textile, Woofer Composition Honeycomb Laminate (HCL), Woofer Surround Rubber, Peak Power Handling 270 watts, RMS Power Handling 90 watts, Sensitivity 94 dB, Frequency Response 45 - 23000 Hz, Impedance (per voice coil) 2 ohms, Top Mount Depth 2-1/4", Bottom-mount depth N/A, Cutout Dimensions N/A
| Price: | $139.99 |
| as of Fri, 22 Feb 2013 07:40:38 GMT ***Remember, deals price on this item for sale just for limited time*** | |
Product Details
- Amazon Sales Rank: #21600 in Car Audio or Theater
- Brand: JBL
- Model: P660C
- Dimensions: 11.00 pounds
Features
- 6-1/2" Power Series Component System
- Peak: 540 watts per system / 270 watts each side | RMS: 180 watts per system / 90 watts each side
- Frequency Response: 45 - 23000 Hz
- Sensitivity: 94 dB
- Top Mount Depth: 2-1/4"
Customer Reviews
Most helpful customer reviews
3 of 3 people found the following review helpful.
By Todd_623
This is an excellent component set for the money. They will sing or scream, hardware is complete, attractive, and of good quality. Adjustable crossover should allow reasonably flat installation in most vehicles.
- Extremely high output capability. Crossover has a selectable -6db toggle for the tweeter, a setting that is needed if your install places the tweeters close to your noggin (pillar, high in the doors, etc.). Woofer is very solid, and being rated at 2ohms is optimized to take advantage of aftermarket amps. Properly enclosed this woofer has good potential for midbass output. Overall the system has the capability to blow your ears out if you drive them correctly, combined with the ability to offer very nice sound quality if you set them up properly. Despite being a soft dome, the tweeters will really sing (or scream). Should please a wide range of users. I'm driving them with a quality 75 wpc RMS amp and there is absolutely no need for more volume output, midbass output is quite strong. In a solid enclosure these could work for full range duty (no subs).
- Tweeters come with a ton of mounting hardware to cover all mounting approaches and angled mounting. Only minus is the factory wiring used to the leads on the tweeters is thin, care needs to be taken during install or you could find yourself resoldering them. Perfectionists may want to attach thicker wiring.
- Woofers also come with thorough adapter rings to support most installation conditions, and attractive grilles if you need them. Overall the hardware provided is what you would expect of a premium component kit, lots of hardware to cover all common installs, and everything that is exposed looks very nice. This is a relatively large voice coil woofer that will produce a lot of bass output for its size easily allowing for a 80hz or lower crossover point, even 40-50 should be OK if your doors can take it. For most cars you are going to want to consider adding dynamat or similar solutions to help bolster / de-rattle your door unless you are crossing them high enough to keep the bass out.
- Crossovers appear to be of good quality and the provided enclosures are nice looking for a "show" type install.
All in all this is an excellent component set for the money. I cannot imagine anyone accustomed to JBL loudspeakers would be disappointed, and barring a competition level system, I don't know what else you could really ask for. Really the thin tweeter leads are about the only neg I can think of, and it is easily resolved.
3 of 3 people found the following review helpful.
By Kevin
These speakers are beasts: 1 1/2" voice coils, pole piece vent hole, voice coil vents above the motor, direct connects, huge magnet.... paired with a cone so lightweight its see-though!! yet so strong, it does not even bend when i push my finger up from the underside. All this equals awesome sound quality that is loud as piss, surprisingly effortless bass with zero distortion, that you will observe before you even hook them up. Everything about them looks great, especially with the Knu Koncepts Twisted Karma SS 16 gauge speaker wire poking out of my door and pouring into the passive crossover.
Please remember my P660 speakers are amplified by a Sundown Sax 100.4D full range 4 channel amplifier. If you are going to pay this much money for nice speakers like these, you need to hook them up to a good quality 4 channel amp also, or else you are wasting money and are not getting to the full potential of these speakers. These speakers have a 2 ohm impedance, so 99% OF HEAD UNITS WILL NOT WORK WITH THESE SPEAKERS, because the internal amplifiers in head units are only 4 ohm stable.
My only complaint is that when i was messing with the tweeters, trying to mount them into my doors, the wires broke off (+ and -) both tweeters, and i had to solder them back on. Conveniently, the same thing happened to my JBL P693 6X9" speakers i bought. They also have direct connects, and right where the wires meet to the speaker, the insulation had fatigued, and the speakers didn't work right.
1 of 1 people found the following review helpful.
By Jay Arnold
I gave much thought to buying JBLs before I pulled the trigger. They sould great. Clear and loud. They cost a bit more than other speakers but are worth it. Spend the money and buy JBL
No comments:
Post a Comment