Product Description
Introducing the new Mobile Monitor (MM) Series high performance loudspeaker systems, the next generation in mobile loudspeaker design. The MM Series features 18 new models, including 3 Ultra Marine designs, to fit virtually any application on land and water. The MM Series is composed of 6 full range systems, 3 component packages and 9 subwoofers. As a result of 3 years of Polk research and development, the new MM systems have been designed to offer unparalleled sound quality with exceptional fit to meet virtually any application. Borrowing technology from our flagship SR Series, the MM Series offers exceptional value for the price. Through the use of high-tech carbon composite baskets, powerful Neodymium motor structures using oversized voice coils, and state-of-the-art woven glass composite cones, we offer high-end audio performance normally found only in the most expensive loudspeaker systems. In addition, these space age materials offer weight savings that can mean higher performance for your car or boat.
| List Price: | $239.95 |
| Price: | $126.00 |
| as of Fri, 22 Feb 2013 07:40:26 GMT ***Remember, deals price on this item for sale just for limited time*** | |
Product Details
- Amazon Sales Rank: #4596 in Car Audio or Theater
- Brand: Polk Audio
- Model: AA2691-A
- Dimensions: 4.38" h x 9.00" w x 6.00" l, 9.00 pounds
Features
- Neodymium Magnets a rare earth metal offering exceptional strength to performance ratio
- Carbon Composite Basket based on the spokes of a wheel is lightweight
- Klippel Optimized Components using a state-of-the-art Klippel Distortion Analyzer
- Woven Glass Composite Cones feature tremendous stiffness-tomass ratio. Lower mass means faster transients and finer detail.
- Large-Diameter Voice Coils (30mm) in drivers increase reliability and power handling capacity.
Customer Reviews
Most helpful customer reviews
6 of 6 people found the following review helpful.
By Stephen M.
I had originally purchased the DB series 6x9 speaker and after installing a Polk PA500.4 amplifier decided I should upgrade the speakers a bit. Actually right after I bought the DB's I regretted not buying the MM's as the price difference was not that significant.
After installing them, which took no time if you have installed speakers before, I fired them up and was immediately impressed. The sound is much fuller, and the highs are quite as harsh as they were with the DB's. The lows sound great and overall the sound quality is spectacular. Also these speakers do come with a crossover for the tweeter and woofer, so that will have to be mounted too. I just took some double sided scotch sticky pads and stuck those to the back and mounted them on the frame of the car. That way nothing is permanent! My only complaint is the speaker wire on the cross over is short, around 3 to 4 ft for everything so sadly amp system doesn't look as clean due to the wires hanging next to it. Not a big deal though.
Overall I am very pleased. I cant wait to get the MM6501 components for up front!!!!
4 of 5 people found the following review helpful.
By M. D. Burns
I purchased these for my wife's car and installed them myself. I was a little concerned at first because I bought them before I actually looked at the "what fit's your car" selector, and of course, it said they would not fit. (I checked this before I bought them, but I guess I was looking at another set of speakers, not realizing that these really were not supposed to fit) We have a 2000 Monte Carlo SS and I was putting them in the rear deck. As it turns out, the issue is the height of the speakers. The tweeter and mid range speakers stick up high enough that they would touch the rear deck cover. However, that only happens if you use the stock Chevrolet plastic speaker mounting brackets that come on the stock speakers. Using those brackets lifts the speaker about an inch above the actual metal surface of the rear deck. What I did to solve that problem was mount them the old fashioned way, the way we used to mount rear deck speakers back in the '70s and '80s. I got in the trunk and held the speaker underneath the speaker hole from inside the trunk, used a punch to scratch the spots for the mounting holes and drilled the 4 holes from underneath. Then took the speakers and put them in the top and screwed them in,and they fit just fine. I was able to put the rear deck cover back in just the way it came out and everything fit perfectly. Once installed, they sounded great. We have a Kenwood DNX6140 and these things work great with it. They sound really good, so much better than the stock speakers! It really woke things up. They have good mid range and highs and the base is much better than stock. They don't hit like a set of subs of course, but are much improved over stock speakers. Highly recommended.
1 of 1 people found the following review helpful.
By Pen Name
This speakers blew me away. I looked at a lot of speakers before settling on these. But man am I glad I did, they are crystal clear and don't distort. I have 125 watts going to these and the matching front components and all I can do is be amazed. They are by far the best speakers I've heard.
No comments:
Post a Comment